Dynabrade 64201 Instrukcja obsługi

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Urządzenia przemysłowe Dynabrade 64201. Dynabrade 64201 4 stron. Industrial downdraft table

Drukuj stronę

Models:

64201 (33in. x 41in.)

Model: 64700 Shown

Read and understand tool manual before

work starts to reduce risk of injury to

operator, visitors, and tool.

Eye protection must be worn at all times,

eye protection to conform to ANSI Z87.1.

Respiratory protection to be used when exposed to

contaminants that exceed the applicable threshold

limit values required by law.

When operating this equipment, basic precautions should always be strictly followed

DOWNDRAFT TABLE SAFETY INSTRUCTIONS

1. Always use a grounded power supply. There is an increased risk

of electric shock with an ungrounded power supply.

2. Don't expose to rain or wet conditions. There is an increased risk

of electric shock if the switch, cord or motor are wet.

3. Do not abuse the power cord. Never use the cord to move the

table. Never use the cord to pull the plug from an outlet. A

damaged cord increases the risk of electric shock.

4. Use caution when opening or closing the top. Switch power off

and unplug cord before opening top. Remove all work pieces and

Industrial Downdraft Table

Operating Manual

64699 (33in. x 60in.)

S A F E T Y L E G E N D

WARNING

I M P O R TA N T S A F E T Y I N S T R U C T I O N S

including the instructions listed below:

Keep workplace area free of contaminants while sanding

and finishing wood or non-combustible materials.

Keep machine running when not in use to help clean

the shop environment.

WARNING

Practice safety requirements. Work alert,

have proper attire, and do not operate tools under

the influence of alcohol or drugs.

WARNING

Ear protection to be worn when exposure to sound,

exceeds the limits of applicable Federal, State or

local statues, ordinances and/or regulations.

WARNING

Electric shock hazard. Avoid bodily contact with

grounded objects, bodies of water.

Do not damage cord set.

tools before opening top to avoid injury. Keep fingers and hands

clear when closing the top to avoid injury.

5. Never use to exhaust chemical vapors

6. Vibration may occur if unit is unlevel.

7. Unplug power cord when accessing blower compartment area.

8. Power switch must be off when servicing filter.

9. Do not use this table to sand or grind materials that

may create sparks.

10. Do not use for explosive metallic dust (Aluminum,

Magnesium, etc.)

IMPORTANT NOTICE

Reorder No. PD05.25

64700 (36 in. x 72 in.)