Active-semi ACT4910EVK1-121 Podręcznik użytkownika - Strona 14
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Mikrokontrolery Active-semi ACT4910EVK1-121. Active-semi ACT4910EVK1-121 16 stron.
Drukuj stronęUG-106
Rev 1.0, 16-November-2017
Advanced Mode
Click the "Advanced Mode" button in the left of the GUI screen to see all available user programmable options.
With Advanced Mode, additional user programmable features can be selected using the button text. In the left
side of the Advanced Mode Screen, click on the Tiles Selector to display the register to view or change. Then
change a register one bit at a time by clicking on the desired bit. The value of the bit is display right next to the
bit-name button.
Note that the far right side of the screen contains a scroll down button to scroll down to additional registers since
the Tile Screen can only display up to 8 bytes at once.
Figure 11 – GUI Advanced Mode
Button Descriptions
Read: Clicking on this button reads the ACT4910 registers and displays them in the GUI. Note that this reads
all registers. Active-Semi recommends reading registers each time the ACT4910 powers-up to acquire the initial
register settings. Active-semi also recommends reading registers after making changes to them. Immediately
reading the registers after a write confirms the changes were properly stored. This also updates the SYSTEM
STATUS box to ensure that one of the changes did not generate a fault condition.
Figure 12 – Read Button
Innovative Power
TM
ActiveSwitcher
TM
is a trademark of Active-Semi.
14