CEL MeshConnect Sub-G Series Wstępny arkusz danych - Strona 9
Przeglądaj online lub pobierz pdf Wstępny arkusz danych dla Jednostka sterująca CEL MeshConnect Sub-G Series. CEL MeshConnect Sub-G Series 15 stron. 868/900 mhz transceiver based modules, development kits
Drukuj stronęMeshConnect I/O PIN ASSIGNMENTS
Number
Name
35
NC
36
NC
37
GND
38
GND
39
GND
40
GND
41
GND
42
P2.2
GPIO connected to LED2 on CEL Eval board
43
P2.1
GPIO connected to Switch 1 on CEL Eval Board
44
P2.0
GPIO connected to LED1 on CEL Eval board
45
P1.7
GPIO connected to Switch 0 on CEL Eval Board
46
P1.6
GPIO connected to LED0 on CEL Eval board
47
P1.5
Memory IC MOSI
48
NIRQ
External Interrupt Request
49
SDN
Radio Shutdown (Active High)
50
GND
51
GND
52
GND
53
GND
54
GND
55
GND
56
GND
SOFTWARE/FIRMWARE
The Sub-G modules support the following software:
•
Synapse SNAP Embedded Firmware
•
Wireless M-Bus (868MHz Only)
•
Silicon Labs EZMac
•
CEL Protocol
The MeshConnect Sub-G Development Kit provides a guide on how to access the Si100x IC and utilize the Silicon Labs
software development environment. It also provides a set of demo applications to conduct several tests. Below is the list of
the demo software features:
MeshConnect™ Sub-G Module Series
(Continued)
Notes
Page 9