AFFORDABLE LIFTS E9997 Instrukcja montażu i instalacji - Strona 14
Przeglądaj online lub pobierz pdf Instrukcja montażu i instalacji dla Systemy podnoszenia AFFORDABLE LIFTS E9997. AFFORDABLE LIFTS E9997 15 stron. Affordable lift
Drukuj stronę4. If the Platform will not "slide" down the Column under its own weight, then the adjustment is too tight and should be
loosened. Reapply tension to the hoist synthetic rope by pushing the "Up" button and then loosen the adjustment bolt.
Do this in 1⁄4 turn increments.
5. Repeat the above steps until the Platform twist is minimized.
16. Controller Storage Box
16.1. Your lift has a grey Controller Storage Box. This box has a hasp onto which you can place a lock. Now is a good time to
bolt it to the Platform railing using the pre-drilled holes. Most people prefer to position it on the outside of the railing in order
to maximize cabin space.
17. The Transition Ramp
17.1. Transition Ramp: Place your ground transition ramp on the ground next to a gate. It is free standing.
18. Battery Backup
18.1. An optional Battery Backup System is available for your lift, but from a different vendor. This would supply electrical
power to your lift in case of a power failure. If you want to purchase this option, please contact Customer Support at (USA)
434-515-2321 (Provide your Serial Number 'E9997' and contact information when you call).
19. Canopy Frame
19.1. An optional Canopy Frame is available for your lift. You would need to supply any roofing or side coverings. If you are
interested, contact Customer Support at (USA) 434-515-2321 (Provide your Serial Number 'E9997' and contact information
when you call) and ask about the optional Canopy Frame.
20. Maintenance
Safety is critically important. If you have any concerns about the safety of your lift please contact Customer Support at (USA)
434-515-2321 (Provide your Serial Number 'E9997' and contact information when you call).
20.1. Maintenance Items:
1. The synthetic rope is a critical piece of your platform lift. Visually inspect it monthly to make sure it is not kinked, frayed
or showing signs of wear. Some fuzz is acceptable. If it is, take the lift out of service and contact Customer Support at
(USA) 434-515-2321 (Provide your Serial Number 'E9997' and contact information when you call).
2. The Self Retracting Lifeline (SRL) is critically important to the safety of your lift. It is the responsibility of the lift's
owner/operator to ensure that the SRL remains in proper operating condition at all times. Absolute confidence is
required in the fall protection system of the lift. Therefore, periodic inspection of its functionality is required. No
procedure can detect every possible condition which could compromise the operational functionality of the fall protector.
Therefore, periodic comprehensive inspection is well advised. Inspect the SRL monthly to make sure it is not kinked,
frayed or showing signs of wear.
Here is how to inspect the SRL:
1. Wear work gloves during the inspection process.
2. Inspect the entire length of wire rope to ensure that there are no broken strands in the wire rope. Broken strands
are cause for failing your inspection.
3. Verify that the wire rope retracts into the housing as the Platform travels to its upper station. Slack in the wire rope
is cause for failing your inspection.
4. Pull wire rope out of the housing swiftly. When the wire rope is extracted at any speed over 3 feet per second, the
device should instantly lock the wire rope. This action will be very similar to an automotive seat belt. Slowly let it
retract. It should retract without leaving slack in its wire rope. Failure to lock at 3 feet per second, or to retract fully
is cause for failing your inspection.
If the SRL fails inspection, take the lift out of service and contact Customer Support at (USA) 434-515-2321 (Provide
your Serial Number 'E9997' and contact information when you call).
3. Paint is important for the protection and long life of your lift. Your lift was primed and painted using industrial quality
Gloss Black. You can apply more paint to repair scratches or cover rust at any time. Our colors are compatible with the
Rustoleum brand. A spray can of this color was supplied for this purpose. Remove rust before painting over a rusted
area.