Aircraft In Miniature HW72-03-001 Historia, uwagi i instrukcje montażu - Strona 3
Przeglądaj online lub pobierz pdf Historia, uwagi i instrukcje montażu dla Zabawka Aircraft In Miniature HW72-03-001. Aircraft In Miniature HW72-03-001 9 stron. 1:72 metal kit of the 1909 santos dumont demoiselle
Drukuj stronęFret 1
REAR
FUEL TANK
SUPPORT
FRONT
FUEL TANK
SUPPORT
CONTROL
WHEEL
FUSELAGE
LOWER
SECTION
FUSELAGE
UPPER SECTION
Fret 2
FUEL PIPE
(1 used, 1 spare)
MAIN WHEEL SPOKE DISC
1 ASSEMBLE THE SPOKED WHEELS
A Drill a 1/16"/1.5mm diameter hole through the centre of the female form tool
as shown in Figure 1 below. This is to let you push the spokes out of the
form tool after they have been formed into a cone.
B Remove four spoke discs from the fret and remove any burrs from the
attachment tabs (the kit includes four spare discs).
SEAT
LEFT WING
LOWER FIN
UPPER FIN
DRILL HOLE IN FORM TOOL HERE
Figure 1
RIGHT WING
TAILPLANE
CONTROL
SKID
COLUMN
Spare and unused parts
REAR SPAR
FRONT SPAR
OUTER
STRUTS
INNER
STRUTS
TAIL
LANDING GEAR
STIRRUP
STRUT
are shown in red.
FUEL TANK SUMP
(1 used, 1 spare)