DynaColor W series Skrócona instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Kamera IP DynaColor W series. DynaColor W series 2 stron. Full hd multiple streams micro dome ip camera
Również dla DynaColor W series: Skrócona instrukcja obsługi (2 strony)
Drukuj stronę
IP Camera Login
The IP Camera's default IP address is: 192.168.0.250. Therefore, to access the IP Camera for the first time, set the
PC's IP address as: 192.168.0.XXX; for example:
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
Login ID and Password
Key in the IP Camera's IP address in the URL bar of the Web browser window and click on <Enter>.
Enter the default user name (Admin) and password (1234) in the prompt request dialogue. Note that user name is
case sensitive.
Install the ActiveX Control
After connecting to the IP Camera, the request for installing the ActiveX control will appear just below the URL bar.
Right click on the information bar, and then click on "Install ActiveX Control..." to permit ActiveX control installation.
In the pop-up security warning window, click on <Install> to start downloading DC Viewer software on the PC.
Click on <Finish> after DC Viewer installation is complete.
Browser-based Viewer
The main page of the IP Camera user interface is shown as the figure below. Please note that function buttons will
vary depending on the camera model.
Full HD Multiple Streams
Micro Dome IP Camera
Quick Guide
Ver. 1.1
000B0MWXZZ00