Aircraft in Miniature Limited TRANSPORT WINGS DC-10-30 KIT Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zabawka Aircraft in Miniature Limited TRANSPORT WINGS DC-10-30 KIT. Aircraft in Miniature Limited TRANSPORT WINGS DC-10-30 KIT 20 stron. 1:72 mixed-media kit of the dc-10-30 second generation jet airliner
Drukuj stronę
LANDING GEAR
DOOR DIMENSIONS
NOSE LANDING
GEAR DOORS
Note: Doors are symetrical
about aircraft centreline
10 mm
37 mm
MAIN LANDING
GEAR DOORS
(2) Cut out the rear doors for the Nose Landing Gear (NLG) and
Centre Landing Gear (CLG) bays (the large forward doors of
each bay are closed when the landing gear is down).
(3) Cut out the slots in the rear fuselage for the tail plane and wing
root support.
9 mm
24 mm
11 mm
Wing trailing edge
Aircraft
L
C
These doors are closed
when gear is down
Position of nose
landing gear leg
These doors are open
when gear is down
These doors are open
when gear is down
Position of centre
landing gear leg
These doors are closed
when gear is down
Position of main
landing gear leg
L
of rear axle on main
C
landing gear bogies,
and of axle of centre
landing gear
Door hangs down
from this edge,
parallel to main
landing gear leg