GREAT PLANES Fling 2m ARF Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zabawka GREAT PLANES Fling 2m ARF. GREAT PLANES Fling 2m ARF 16 stron.

ASSEMBLY INSTRUCTIONS

❏

1. Slide the canopy forward till the rear wire is visible.

❏

2. Lift the rear of the canopy till the wire is clear of

the fuselage.

❏

3. Slide the canopy aft until the front wire comes free.

❏

4. To attach the canopy, reverse the previous steps.

❏

1. Locate the two hardwood and two aluminum wing

joiner plates.

❏

2. Using epoxy, glue the joiner plates together. The two

aluminum plates are glued between the two hardwood

plates. Allow the epoxy to fully cure before proceeding.

❏

3. Test fit the wing joiner into the slots in the wing halves.

Sand the joiners as required to get a good fit. Note: If the

root rib angles aren't exactly the same, that's OK. The

difference can be filled with a little epoxy when the wings are

joined. The proper dihedral angle and the gluing of the wing

joiner are more important than the fit of the two wing panels.

❏

4. Cover your workbench with wax paper or Great Planes

Plan Protector.