GREAT PLANES Kunai Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zabawka GREAT PLANES Kunai. GREAT PLANES Kunai 17 stron. Model aircraft great planes kunai

❏

3. Glue the stab to the ﬁ n, making sure the two are

perpendicular to each other.

❏

4. Glue the elevator joiner into position, making sure the

elevators are parallel with each other—in the illustration, two

balsa sticks were used to align the elevators while glue on

the joiner dried.

❏

5. To aid in stab alignment in the next step it will be helpful

to tape the elevators and rudder centered with the stab and ﬁ n.

❏

6. Mount the wing to the fuselage and test-ﬁ t the stab/

ﬁ n assembly into the slot in the back of the fuselage boom.

View the model from behind, checking to see if the stab is

parallel with the wing (the kit box top or bottom serves as a

handy stand).

❏

7. If necessary, sand a slight bevel to the appropriate side

of the base of the ﬁ n. Allow it to tilt and bring the assembly

into alignment with the wing.

❏

8. Once alignment is achieved, glue the assembly into

position. Use strategically positioned weights to hold the stab

in alignment with the wing until the glue dries.