GREAT PLANES PBY Catalina Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zabawka GREAT PLANES PBY Catalina. GREAT PLANES PBY Catalina 20 stron. Arf

❏ ❏

7. Remove the protective covering from the three wires

that exit the hole in the top of the wing and tape them to the

wing to prevent them from falling into the wing.

❏ ❏

8. Test ﬁ t the motor mount assembly to the wing. When

satisﬁ ed with the ﬁ t, glue the motor mount assembly to

the wing.

❏ ❏

9. From the 4 x 100mm (4") heat shrink tubing cut three

13mm (1/2") lengths. Slide one onto each of the three motor

wires. Plug the color coded motor wires into the extensions.

Slide the heat shrink over the connection, making sure the heat

shrink covers the brass connectors in a way that will not allow

any metal to metal contact. Then shrink the tubing. Secure the

wires to the wood motor mount with a small tie wrap.

❏ ❏

10. Carefully ﬁ t the nacelle over the motor mount. It is a

tight ﬁ t so move slowly and cautiously. It will ﬁ t! When installing

the nacelle be sure the small hole for air exhaust is located to

the bottom of the nacelle. The nacelle can be secured to the

wing with a small amount of glue or a piece of clear tape.