GREAT PLANES Spirit 100 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zabawka GREAT PLANES Spirit 100. GREAT PLANES Spirit 100 20 stron.

❏ ❏

9. Trim the excess string from the spoiler hook.

❏

10. Repeat steps 1-9 for the second spoiler.

Install the Aileron and Flap Servos

❏

1. Cut a 3/16" x 1/2" [4 x 13mm] slot in the bottom of each

wing panel aligned with the hole in the root rib and 3/16"

[4mm] from the wing center.

❏

2. Pull the servo leads up through the 3/16" x 1/2"

[4 x 13mm] slot.

❏

3. Locate the openings for the flap and aileron servos in

the bottom of each wing panel. Trim out the covering and

seal the edges using a sealing iron.

❏

4. Locate the four servo hatch covers and trim out the

servo arm openings. Seal the edges using a sealing iron.

❏

5. Trial fit your servos on the covers and mark the

locations of the servo blocks. Using epoxy, glue the servo

blocks to the hatch covers. NOTE: The flap servos should be

oriented the same for both wing panels.