DaySequerra M2A-FM Podręcznik użytkownika - Strona 15

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Monitor DaySequerra M2A-FM. DaySequerra M2A-FM 16 stron. Analog fm modulation monitor

From this point, the UP and DN switches can be used to select the next subcarrier frequency to be

measured or the Carrier Modulation Select switch can be used to exit the Sub-Pilot injection level

measurement mode.

Note : The injection level display for 57kHz is one-half of the legend marked on the M2A-FM front panel. The

front panel legend indications for 19kHz, 67kHz and 92kHz are correct as marked on the M2A-FM front

panel.

Alarm Connections

The M2A-FM provides five dry, floating relay alarm outputs on a rear panel mounted DB15 connector to

report conditions. The following lists the DB15 pin-outs. Relay contacts are rated at 1A @ 24VDC.

Alarm on Loss of

RF Carrier

Audio

Audio Peak

Pilot Present

RBDS Data

Modulation Peak Alarm

M2A-FM Ethernet Port Option

The M2A-FM Ethernet Port Option offers DaySequerra's Remote Dashboard

based application, and an Ethernet interface to provide remote control monitoring for FM broadcasts as well

as a robust alarm panel.

Please email your M2A-FM serial number and contact information to [email protected] or

containing the Remote Dashboard

instructions in the Remote Dashboard

software installation before connecting the PC and using your M2A-FM for the first time.

In the event that you encounter any difficulties with your DaySequerra Remote Dashboard

free to contact us at 856-719-9900. Our office hours are from 9 to 5 ET, Monday through Friday. Or you

can email your questions to: [email protected].

NC Contact

software application that came with your M2A-FM. Follow the

User Guide to change your M2A-FM's IP address and complete the

NO Contact

Common

software, a proprietary PC-

M2A-FM User Manual

, please feel