Celar 13 Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Szybkowar elektryczny Celar 13. Celar 13 18 stron.
Drukuj stronę
instructions for use
BEFORE EACH USE
4)
Check if the pressure regulator (consisting by the upper and lower part, which
purpose is to keep the pressure inside the pan) is not obstructed, by looking
through the lower part before removing the pressure regulator (upper part).
Remove any food remains and check if the black part of the pressure regulator is
properly tightened. If not, tighten it. Check if the sealing ring is fitted properly
(page 11.1.1 point I).
5)
Check if the safety valve is in good condition by pressing the bolt on the inside of
the lid. A small pressure should be enough to make it move. Remove any remains
from food that accumulates at the base of the valve. This valve only actuates in
case the pressure regulator does not function correctly. If for any reason the
safety valve dismantles, contact the manufacturer - Alumínios Cesar, S.A.
6)
To close the pan, place the lid by sliding it over the edge of the pan, with the ends
of the lid crossbar, toward the holders. After sensing the flap attachment on the
edge, turn the catch knob to the right until the flap is secured to the brackets.
After this stop, in order to obtain a good seal, you must make at least one and
a half rotation.
07
(1)
(+1/ 2)