DayStar Filters SolaREDi 66 Podręcznik - Strona 14
Przeglądaj online lub pobierz pdf Podręcznik dla Teleskop DayStar Filters SolaREDi 66. DayStar Filters SolaREDi 66 17 stron.
Drukuj stronęSpecifications:
Wavelength:
Tuning knob:
FWHM:
Objective:
Aperture:
Focal Length:
Barlow:
Blocking filter: Integrated 18mm blocking filter
Clear aperture: 19mm clear etalon aperture
Full disk:
Focuser:
Eyepiece side: 2"-24 UNS "SCT" thread
Mounting foot: Vixen style dovetail with two ¼-20 holes.
Power:
Wall adapter:
Opt. battery:
LED indicator: Yellow: temperature settling.
Settling time:
Temperature:
Dimensions:
Weight:
Includes:
Warranty:
6562.8Å
Wing shift +/- 0.5Å in 0.1Å increments.
Not specified. Prominence units are generally 0.6Å or
above, Chromosphere units generally 0.5Å or below.
Air spaced two element ED Apo, fully multicoated.
66mm
936mm with focal point 94mm behind 1.25" flange.
Integrated, fully baffled 2 element telecentric 2.4X barlow
optimized for 656nm
Full disk visible for eyepieces more than 18mm FL or
image sensors more than 9mm tall (1" format or larger).
Full disk in smaller sensors requires focal reducer.
Dual speed crayford style, with 10:1 reduction and lock.
1.25" female drawtube via included adapter with
brass compression ring to protect eyepiece.
USB power, 5v 1.5amp, female Micro-B connector.
Power is required for proper operation.
90-240VAC wall adapter, includes US, UK, Euro and
Australian plugs.
Optional 8-hour battery pack available.
Green: ready to observe, filter on band.
Red: fault such as low voltage.
Approximately 5-15 minutes after power up or change
of wing shift.
Ambient temperature range 40° -100° F
126mm wide x 110mm tall x 446mm long
2.3kg (4lb 15.5oz)
SolaREDi 66 telescope, power supply, user manual.
5 years