DayStar Filters Combo Quark Hydrogen Alpha Eyepiece Podręcznik
Przeglądaj online lub pobierz pdf Podręcznik dla Akcesoria DayStar Filters Combo Quark Hydrogen Alpha Eyepiece. DayStar Filters Combo Quark Hydrogen Alpha Eyepiece 16 stron.
Drukuj stronę
DAYSTAR FILTERS
Congratulations on your purchase of a Quark Hydrogen Alpha "Eyepiece"
solar filter, designed specifically for compatibility with Schmidt Cassegrain,
Maksutov, and F/15 or greater Refractor telescopes.
manual before using the product.
To use the filter, plug in the included power supply. For SCT or Maks,
place a red or yellow glass off axis ERF (not included) over the front of
the telescope, and the included wedge adapter between the telescope
and the Quark, with the set screw on the wedge adapter pointing on the
same side as the off axis hole. For F/15 or greater refractors, do not
use the wedge adapter. Then insert the Quark and insert an eyepiece
or camera in the rear of the Quark. Turn the knob to point straight
away from the light. When the light turns green in about 5-15 minutes
your viewing experience can begin.
To prevent damage, we strongly recommend using an Energy Rejection
Filter.
This can be a red or yellow glass ERF mounted in front of the
telescope.
Warnings:
Do not disassemble the filter, the blocking element is separated from the
etalon and the complete assembly must be used together for safe viewing.
Do not power the filter from a computer or cell phone charger as the Quark
requires a high current power supply (> 1.5A) for operation.
For assistance:
Call:
1 (866) 680-6563
Visit:
http://www.daystarfilters.com
COMBO QUARK
Email: [email protected]
Please read this