Automated Logic ZS Standard Podręcznik użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria Automated Logic ZS Standard. Automated Logic ZS Standard 16 stron.

Automated Logic ZS Standard Podręcznik użytkownika

ZS Pro Sensor

Navigating the sensor's screens

The control program determines what screens you see, what information is in each screen, and what
you can adjust. The type of sensor also determines what you see. For example, if the sensor reads
temperature, humidity, and CO
This screen...
Home
Setpoint adjustment
Information
Diagnostic

Reading the display

Depending on the control program and the type of sensor, you may see any of the following items in the
sensor's screens.
This item...
or
ZS Sensors
Rev. 4/27/2015
A ZS Pro lets you:
View information in the display such as zone temperature,
setpoints, outside air temperature, and equipment status
Make the zone warmer or cooler
Override the schedule to put the zone in an occupied state
Edit information if allowed by the control program
Force the zone to an unoccupied state
See that the zone is in an occupied state when the green LED is
lit
, the Home screen may cycle through the current values.
2
Displays when...
The sensor has had no user interaction for 5 seconds.
You press the
(page 5).
You press the
button. Tap the button to cycle through various
information.
You hold the
button for 3 seconds. Tap the button to cycle through
various information to troubleshoot your system.
Indicates...
The temperature is Fahrenheit or Celsius.
The value shown is percent relative humidity.
ALC Proprietary and Confidential
or
button. See To make the zone warmer or cooler
3
© 2015 Automated Logic Corporation
All rights reserved