DAYTAI DT-OLS-116 Podręcznik użytkownika - Strona 12

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt oświetleniowy DAYTAI DT-OLS-116. DAYTAI DT-OLS-116 16 stron. Optical light source

laser source. Normally less than 15 minutes would be okay.

5.4.1 Open the dust cap, connect with the patch cord.

Notice: Make sure the connector and the end-face of the patch cord is clean, and take notice

on the type of the patch cord, make sure the correct patch cord are connected.

5.4.2 Laser on the light source.

When open THE LIGHT SOURCE, the laser source still laser off, only after press

can laser on the diode (5-8 & 5-9)

Laser off

Notice: To avoid risk of serious eye damage, Do not look into the interfaces at any

time.

5.4.3

Select the wavelength

Press

, select the output wavelength, display at the top of the screen. 5-10

Optical Light Source (DT-OLS-116)

Laser on(output wavelength 1310nm, rated

output power-5.00dBm，0Hz means do not

load the frequency

5-8 Press

to laser on the diode

Laser on(output wavelength 1310nm,

rated output power-5.00dBm ， 270Hz

frequency0Hz means do not load the

frequency

5-9 press

to laser on the diode