Hiberr YU-E20 Podręcznik użytkownika - Strona 2
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla System mikrofonowy Hiberr YU-E20. Hiberr YU-E20 3 stron. Professional wireless microphone system
Drukuj stronęFEATURES
FRONT PANEL
➌ ➋
➍
➎
① Power Switch
② Lock/Unlock
③ Manually set the frequency
Automatic frequency selection
一、 LOCK: PRESS AND HOLD THE ➋ VOL/LOCK BUTTON (ABOUT 3 SECONDS)
the receiving host will enter the locked state (the screen of the receiving host will display a lock
symbol)。
Note: After locking, the system cannot adjust the frequency。
二、UNLOCK: WHEN THE RECEIVING HOST IS LOCKED
press and hold
the➌
VOL/LOCK button (about 3 seconds) to unlock (the screen lock symbol of the
receiving host disappears)。
三、MANUALLY SET THE FREQUENCY➌：
1. Press UP or DOWN to select target frequency；
2. Press the SCAN / SYNC to confirm the selected frequency；
3. Press the SCAN / SYNC again to enter the sync frequency interface（The receiving host will display
the IR------------）；
4. Align the infrared window of the transmitting and the receiving host (about 3cm to 7cm). When
the frequency displayed of the transmitter and the receiving host same, the synchronization is
successful。
四、AUTOMATIC FREQUENCY SELECTION➌：
1. Press and hold the SCAN / SYNC (about 3 seconds) to enter the automatic frequency selection
mode (the frequency number on the receiving host screen is changing), the system will scan all
channels；
Note: If you want to stop the program during scanning, please press the SCAN / SYNC 。
2. After the scan is completed, the receiving host screen will display the optimal communication
frequency, press SCAN / SYNC to enter the synchronization frequency interface（The receiving
host will display the IR------------）；
3. Align the infrared window of the transmitting and the receiving host (about 3cm). When the
frequency displayed of the transmitter and the receiving host same, the synchronization is
successful。
五、VOLUME ADJUSTMENT➋➌：
1. Press the VOL/LOCK key to switch to the volume adjustment interface；
2. Press the UP or DOWN button to adjust the volume；
3. Press the SCAN / SYNC key to confirm the volume setting。
REAR PANEL
➊
❾
➏
➐
➐
❽
④ LCD Screen
⑦ XLR Output Jack A/B
⑤ Sync
⑧ 1/4"' Output Jack
⑥ Antenna Jack A/B
⑨ AC Adapter Jack
➊
➏
➋
➌
➍
FEATURES
HANDHELD TRANSMITTER
① Interchangeable Microphone Head
② Handheld Body
③ LED Display
④ On-off Switch
⑤ Battery Case
⑥Infrared receiving window
➏
➊
➍
➎
➌
➋
BODYPACK TRANSMITTER
① Antenna
② Microphone Input Jack
③ Power Switch / Volume Knob
④ Power Indicator
⑤ LED Display
⑥ Infrared receiving window
⑦ Battery Case
⑧ Battery Case cover
➊
➎
➏
➐
❽