DAYTEK SLIM Instrukcja obsługi produktu - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi produktu dla Stojaki i stojaki DAYTEK SLIM. DAYTEK SLIM 8 stron. Easy lock fold down clotheslines
Drukuj stronęWALL MOUNTING INSTALLATION
Tools required for installation:
•
13mm spanner
•
10mm spanner
•
Spirit level
•
Tape measure
•
Pencil
•
Hammer drill + suitable drill bit
•
Wall fixings (to suit your chosen
installation surface)
•
Scissors
INSTALLATION PROCEDURE
1. MOUNTING LOCATION
For best drying results, select a location that
receives maximum sunlight and airflow.
Ensure that the area has sufficient clearance around
the clothesline. We recommend 100mm clearance
each side and 500mm in front of clothesline frame
when open (refer to frame size on page 1 of manual).
FIGURE 1
170mm (Distance
between holes)
Users
Height
+
100mm
Important:
Mounting hardware required will vary depending on the surface
of the wall the Clothesline will be mounted to.
When mounting to concrete, brick or masonry walls we recommend
Daytek 8mm Marine Grade Anchor Bolts (Sold separately).
For wood or other specialised materials please consult your local
hardware store or professional for advice.
Never attach clothesline to mortar between brickwork. Ensure fixing
surface is structurally sound.
Install away from Heating or Cooling Units.
Mounting Width
Centre to centre fixing points for installation,
Mini — 1520mm / Slim, Single — 2220mm
Mounting Height
The recommended mounting height for the top hole
in the wall bracket is:
User height +100mm
Minimum mounting height 1500mm
Note: always consider the main users height and the
length of the items you plan on drying.
WALL BRACKET CENTRES
MIINI FOLD DOWN 1520mm
SLIM FOLD DOWN 2220mm
SINGLE FOLD DOWNS 2220mm
Note: Clothesline shown in fold down position
GROUND LEVEL
3