Daytona DJS3TY Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Walety Daytona DJS3TY. Daytona DJS3TY 8 stron. 3, 6 and 12 ton double locking pin jack stand
Również dla Daytona DJS3TY: Instrukcja obsługi i instrukcje bezpieczeństwa (8 strony)
Drukuj stronę
Assembly
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
1. Secure the chain to the jack stand by attaching the
split ring to the Hole near the Pawl. See Figure A.
2. Turn Post so that the teeth on its side face
the Pawl. Insert Post into the Base.
3. Bend Stop Tab in to secure the Post
into the Base. See Figure A.
CAUTION! Be alert to pinching hazard
when lowering the Post.
CAUTION! TO PREVENT INJURY: Before
using the Jack Stands, make sure the Post
cannot be pulled up and out of the Base.
4. Repeat Steps 1 through 4 with the other Jack Stand.
Jack Stand
For technical questions, please call 1-888-866-5797.
Stop Tab
Figure A
Pawl
Split Ring Hole
Split Ring
Page 3