Automatic SA200-A Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sander Automatic SA200-A. Automatic SA200-A 11 stron. 200w 1/3 sheet sander

sandpaper to eliminate the unwanted marks before going

on to a finer grit and finishing the job.

WARNING: Do not use the same sanding sheet for

wood and metal. Metal particles become embedded in the

sandpaper and will scour a wooden surface.

Maintenance

WARNING: When servicing, use only identical

replacement parts. The use of any other part may create a

hazard or cause product damage.

If the replacement of the supply cord is necessary,this has

to be done by the manufacturer or its agent in order to

avoid a safety hazard.

DO NOT use solvents when cleaning plastic parts.

Plastics are susceptible to damage from various types of

commercial solvents and may be damaged by their use.

Use a clean cloth to remove dirt, dust, oil, grease etc.

WARNING: Do not allow brake fluids, gasoline,

petroleum-based products, penetrating oils, etc. to come

into contact with plastic parts. They contain chemicals that

can damage, weaken or destroy plastic.

WARNING: DO NOT attempt to modify tools or create

accessories. Any such alteration or modification is misuse

and could result in a hazardous condition leading to

possible serious injury. It will also void the warranty.

DO NOT abuse power tools. Abusive practices can

damage the tool and the workpiece.

All of the bearings in this tool are lubricated with a sufficient

amount of high-grade lubricant for the life of the unit under

normal conditions. Therefore, no further lubrication is required.