Celect CC908XWHB-7-DF1 Podręcznik - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik dla Kontroler Celect CC908XWHB-7-DF1. Celect CC908XWHB-7-DF1 13 stron. Waterline master control controller

Drukuj stronę

Tabletop installation：

Error and Alarm function

warning flashes on the screen for approximately 30 days when your thermostat runs out of

1) "

batteries. Replace the batteries when Low battery warning flashes

2) Room Temp (inside room Sensor) broken or short cut, the thermostat will have "room ERR" display

3) Communication alarm: When the thermostat stops or starts the output, the receiver do not start or not

receive some signals that can not return to the thermostat, display will show Er2

OUTPUT REGULATION

Press

to shift standby or running mode

Standby mode (OFF mode): The system has no output or Temperature lower than the low limitation (LO)

alarm,

Running mode (heating mode):

1. Room sensor circuit broken or short cut, heating output stop.

2. Setting Temp – Room Temp ≥1℃, heating output on (Fast heating or slow heating, see configuration

menu 6 items)

3. Room Temp – Setting Temp ≥1℃, heating output off,

Configuration setting

In standby mode press ③ button under the above three seconds, Through the

After

button adjustment,

、

adjustment according to the ④ buttons preservation.