Daytona 80458 Instrukcja obsługi - Strona 12
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Silnik Daytona 80458. Daytona 80458 18 stron. Finger-follower dohc 4valve cylinderhead upgrade kit, engine narrow pitch
Drukuj stronęDISASSEMBLY
When removing the cylinder head cover and cylinder head, take care not to damage
the mating surfaces.
When disassembling, mark and store the disassembled parts to ensure that they are reinstalled
in their original locations.
Remove the bolts on the head cover.
Remove the head upper cover.
Put the bolt in the position shown in the figure and tighten the screw to raise the upper cover.
M6 HOLE
Remove the rubber gasket and dowel pin.
SCREW (M6X30 OR LONGER)
RUBBER GASKET
Remove the tappet covers.
GASKET
TAPPET COVER
DOWEL PIN
80458-M PAGE 3/9
2021.06.21