Daytona 80674 Instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria motocyklowe Daytona 80674. Daytona 80674 2 stron. Steering damper kit for h-d fxst ('00-'07)
Drukuj stronęInstall BODY CLAMP
#3. FRAME CLAMP
#8. M8 FLANGE NUT
#6. ROD END
#9. M8 NUT
DO NOT over tighten the damper body clamp. The stabilizer
body can be damaged.
8. M8 FLANGE NUT
[ 22N-m / 16lbf-ft ]
3. FRAME BRACKET SET
[ 10N-m / 7lbf-ft ]
5. BODY CLAMP
HIGH PERFORMANCE PARTS AND ACCESSORIES FOR ALL MOTORCYCLE LOVERS.
#7.M8X30 BUTTON HEAD SCREW
#1. DAMPER BODY
#5. BODY CLAMP
105-115mm
(4.14"-4.53")
Adjust the DAMPER
BODY(#1) position. Make
sure DAMPER BODY(#1)
doesn't hit any part of
motorcycle when turning
the handlebar to the leftmost
and rightmost position.
(see Fig.10)
2. FRONT FORK BRACKET SET
[ 10N-m / 7lbf-ft ]
7. M8x30
BUTTON HEAD SCREW
6. ROD END
**Each motorcycle has different tolerance. Therefore, different
combination of the fork bracket angle and the body clamp may
be necessary within small range instead of indicated positions
by the diagrams.
Adjust the bracket and the body clamp to the set stabilizer on
the best position if necessery.
Turn the handlebar and check the steering to see if it reaches
both right and left steering stoppers completely.
Make sure the stabilizer does not hit or rub against the fork
tube, frame, engine or the front brake line under the steering
stem.
Tighten all bolts and nuts after to make sure the installation
done right.
Then adjust to your desired level of dampening.
Softer
Harder
9. M8 NUT
[ 22N-m / 16lbf-ft ]
1. DAMPER BODY
37582 / 80674 : 20210915
How to adjust the damping force
Turn the adjustable knob
clockwise → Harder
Turn the adjustable knob
counter-clockwise → Softer
4. M8x25
BUTTON HEAD SCREW
[ 22N-m / 16lbf-ft ]
Apply thread locking fluid
PAGE 2 of 2