GreatCo GI-32-ZC Instrukcja instalacji i obsługi dla właściciela domu - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla właściciela domu dla Kominek wewnętrzny GreatCo GI-32-ZC. GreatCo GI-32-ZC 9 stron. Electric heater with remote control
Drukuj stronęMethod 2: Permanent Install
(1) Put 2 wood strips in existing
fireplace cut to fit the height of the
opening, and spaced 26.5" apart
(4) Put the fireplace insert into
place and using wood screws (not
included) attach the insert to the
surround and wood strips
shown locations.
Plug the power supply cord into a wall outlet (120Vac, 60Hz).The cord has a plug as shown at A.
You should follow as shown at the below:
42000 Rev C 8-26-13
(2) Fix the wood strips with
masonry
screws
appropriate screws for the material
you're attaching to.
(5)Attach front face trim by hanging tabs on top, then pressing lower pins into spring
at
clips at bottom
GROUNDING
Grounding methods
(3) set insert surround into place.
or
other
Run cord through passthrough
hole if necessary .
(6) Completed Assembly
6