Emeril Lagasse RETRO Instrukcja obsługi - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Ekspres do kawy Emeril Lagasse RETRO. Emeril Lagasse RETRO 16 stron. Espresso machine
Troubleshooting
PROBLEM
No espresso is made.
Espresso leaks from around
the portafilter.
Portafilter can't be fitted.
Coffee tastes weak.
Light slowly pulsing on and off.
Light flashing rapidly.
EM0042-0BL_29601_E_IB_A.indd 13
EM0042-0BL_29601_E_IB_A.indd 13
POSSIBLE CAUSE
Water tank empty.
Portafilter or sieve is blocked.
Machine needs descaling.
Grind is too fine or coarse.
Too much tamping pressure
was used.
The portafilter is not fitted
correctly.
Too much coffee in the sieve.
Debris around the portafilter
fitting.
Not enough coffee in the sieve. Use the supplied measure/
Grind is too fine or coarse.
Coffee too loose in sieve.
This is normal and occurs when the machine in heating up.
Steam /hot water control knob
in the open position.
The control lever has been in
the brewing position (G) for
longer than 60 seconds.
You have been trying to create
steam for longer that 180
seconds.
You have been trying to make
hot water for longer that 90
seconds.
Attempting to brew before the
machine has reached operating
temperature.
Attempting to steam before the
machine has reached operating
temperature.
SOLUTION
Fill the water tank.
Remove and clean.
Descale the machine.
Grind the coffee to the correct
consistency.
Empty sieve and re-add coffee
using less tamping pressure.
Remove and refit the portafilter.
Make sure it is turned fully to
the right until it won't turn any
further.
Use the supplied measure/
tamper as directed.
Clean the area where the
portafilter fits.
tamper as directed.
Grind the coffee to the correct
consistency.
Tamp the coffee down with
more pressure.
Turn the steam /hot water control
knob to the closed ( A ) position.
Reduce the brewing time.
Reduce the steaming time.
Reduce the hot water running
time.
Allow the machine to heat up
(gauge shows B).
Allow the machine to heat up
(gauge shows D).
13
1/31/23 3:56 PM
1/31/23 3:56 PM