DaytonAudio MARK1 Podręcznik użytkownika - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Głośniki DaytonAudio MARK1. DaytonAudio MARK1 4 stron.
Również dla DaytonAudio MARK1: Podręcznik użytkownika (7 strony), Podręcznik użytkownika (7 strony)
Drukuj stronę
TROUBLESHOOTING/NOTES
• If the Speaker can't be found in Bluetooth mode the speaker could be
connected to another device. Remove the device from any other devices and
try again. If you still can't find the Bluetooth speaker, please turn off the speaker
for 5 second then turn it back on.
• Bluetooth signal is intermittent: the effective distance between speaker and
device is 30 feet, the signal will be intermittent if the distance between the
device and speaker is more than 30 feet.
• If your Bluetooth device is in search mode it may find many other Bluetooth
devices, please wait until the search is finished and select the MARK1 speaker
to pair.
• Don't hold the mobile device to close to the speaker when using the phone
function to avoid echo.
• NFC: please make sure the mobile has NFC function and it is turned on in the device.
SPECIFICATIONS
Operating temperature:
0ºC-55ºC (32ºF~131ºF)
Amplifier output power:
Left/Right 1.5Wx2, subwoofer 3.5Wx1
Amplifier input sensitivity: ≤400m V
Amplifier SNR:
≥ 70dB
Frequency response:
70Hz~20KHz
Power voltage:
AC100-240V, 50/60Hz / DC 9V, 1.5A
Battery:
7.4V 2000mAh
Battery time:
10hours
Battery charging time:
4-6hours
Blue tooth range:
7-10M (22-33 ft.)
Bluetooth version:
3.0 2.4G Support A2DP
6
CONTROL PANELS
FRONT PANEL
TOP PANEL
BACK PANEL
3