Hiboy ECOM 14 Podręcznik użytkownika - Strona 15

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Skuter Hiboy ECOM 14. Hiboy ECOM 14 15 stron. 14" electric scooter
Również dla Hiboy ECOM 14: Podręcznik użytkownika (11 strony)

Drukuj stronę

Trouble shooting

Error description

Error code

Motor Hall Error

Brake Error

There is problem for the communication between

the top display and controller inside the frame

Over current protection, when E4 appears, both

electronic brake and throttle will stop working

Low voltage protection, when the battery voltage

is lower than 30V, it will show up E5

There is problem for the communication between

the top display and controller inside the frame

Controller Error

Motor Stuck Error

Solution

Need to check if the motor hall cables are connecting well ﬁrst, if

any cable is not connecting well, re-connect it and see if the E1 error

disappears;After re-connecting the haul cables and E1 still exists,

then need to replace the motor.

Check whether the contact switches of the left and right brake bars

cannot return to the position. If they cannot return to the position,

please replace the brake bars.

(Brake handle fault will only be detected when starting up)

Need to replace the top display PCB and the

display-controller connection cable

Normally the E4 will disappear automatically after cool down the

scooter for a while, if the E4 continues to show up frequently, then

need to replace the controller

First charge the scooter and see if E5 disappears, if E5 doesn't

disappear after charging, then need to replace the battery

Check whether THE communication assembly line between the top

display and the controller is loose or the communication line is torn off.

Replace the controller and the top display

Need to replace the controller

Turn the motor wheel by hand to see if the motor is stuck. If the

motor is stuck, replace the motor with a new one.

15. Contact Us

E-mail Service: [email protected]

@Hiboy_Ofﬁcial

@HiboyUS

HiboyUS