Automatic Systems TR450 Instrukcja instalacji - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Bramki obrotowe Automatic Systems TR450. Automatic Systems TR450 13 stron. Tripod turnstile

Drukuj stronę

3.7.3.

Removing the unit

Loosen the four expansion bolts inside the front and rear end sections, at the bottom of the

housing.

Remove the two fixing brackets from the turnstile.

Note:

Either remove, or cut off floor fixing expansion bolts and make good the floor

surface, protruding fixings are a dangerous risk to the health and safety of persons

using the area.

Using manual handling or fork-lift truck remove the tripod turnstile to safe or its new location

for installation.

3.8.

Scrapping the equipment

•

When the equipment is withdrawn from use, proceed with the dismantling procedure as

described in paragraph [3.7. Temporary dismantling]. Ensure that the various components of the

equipment (metals, electrical components, plastics, etc.) are handled, recycled, or disposed of in

the appropriate method, to comply with regulations and codes of practice in the country where the

unit is to be scrapped.

 Automatic Systems TR450-GB

YD-XX

MQ-1302

31/08/97

Automatic Systems

Installation TR450

2-1105GB

p. 13/12

Rev.: A