DaytonAudio DCS165-4 Podręcznik

Przeglądaj online lub pobierz pdf Podręcznik dla Subwoofer DaytonAudio DCS165-4. DaytonAudio DCS165-4 7 stron. Down-firing subwoofer kit assembly

DCS165-4 Down-Firing Subwoofer Kit Assembly

Thank you for purchasing the DCS165-4 Down-Firing Subwoofer kit. This kit was precision cut

using CNC machinery for the best possible fit and finish. With a little time and patience, your

finished product will provide years of enjoyment. Please use the following instructions for the best

possible results.

Drill

5/64" drill bit

Wood clamps (you can never have too many of these)

Sanding block and/or electric finishing sander

Speaker or hook-up wire (14-16 gauge)

Pencil or Sharpie marker

#8 x 3/4" Pan head wood screws

First, empty the contents of the package and review parts to ensure everything has been included

and is in good condition. If any parts are missing or damaged please contact our customer service

department at 1-800-338-0531.

A) 1 x Dayton Audio DCS165-4 6-1/2" Classic Subwoofer 4 Ohm

B) 1 x Port Tube 2" ID Adjustable

Suggested tools and consumables:

Package contents:

Components:

Rag or paper towels

Solder

Soldering iron

Wood glue

Binding post/terminal cup

Phillips screwdriver

Plate Amplifier