GAI-Tronics KETS 1141 Instrukcja instalacji i obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Telefon GAI-Tronics KETS 1141. GAI-Tronics KETS 1141 20 stron. Titan illuminated crossing telephone
Drukuj stronęWARNING:.Your warranty will be invalidated if :-
1. Any fixing hole made in the rear enclosure is left unused.
2. Any additional holes are drilled into the telephone enclosure.
3. Plastic bushes are not used on all fixing holes.
2. Mark the wall with hole centres based on the dimensions shown
(145 x 270mm). If necessary offer the rear enclosure up to the wall
to check alignment. Do not use the enclosure as a template for
drilling.
3. Drill holes in the wall on the marked positions. Select appropriate
screws, wall plugs etc., for the type of wall, bearing in mind that the
weight of the complete phone is around 5kg.
IMPORTANT: Check that screws seat properly in the plastic bushes to
ensure a watertight seal. Do not use excessive tightening force, as
this may crack the case.
4. Ensure that all four plastic flanged bushes are in place and the rear
enclosure is screwed tightly to the surface to prevent any water
ingress through the punched holes.
5. Complete the installation by making the appropriate connections
(section 7) and re-fitting the face plate.
6.4. Pole mounting
10
KETS 1141 Titan Illuminated Crossing Telephone