ActiveFlame NDF-26FF Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kominek wewnętrzny ActiveFlame NDF-26FF. ActiveFlame NDF-26FF 13 stron.

Installation- Wall Mount

Wall location preparation

□ Select the wall location where you want to hang your

fireplace.

□ Draw a horizontal line using a level (Figure F)

□ Using the mounting bracket as a guide, mark 4 drill holes

for the 4 anchors (for drywall) or 4 screws (for wood studs).

NOTE: The holes are for mounting the fireplace. Insure

the horizontal line is level so the heater can be mounted

properly.

NOTE: Please maintain at least 36 inches between the air

outlet on the fireplace and the ceiling.

REMARQUE : Le foyer n'aura pas de fonctions de chauffage

disponibles si l'interrupteur DEMO est activé. Reportez-vous

à Fonctionnement - 4 pour plus de détails.

Pre-drill screw

□ Drill 4 holes 8 mm (5/16in) in diameter and 43 mm (1.7in)

deep on the marked locations.

□ For holes that do not hit a stud, use the supplied wall

anchor. Install the wall anchors into the holes and gently

tap them into place with a hammer until the flange of the

wall anchor is flush with the wall surface. See Figure G.

________

B X 4

(or as required)

Anchor/Screw locations

Figure F

Figure G