Hickory 5.5 E Instrukcja instalacji - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Piekarnik konwekcyjny Hickory 5.5 E. Hickory 5.5 E 15 stron.
Drukuj stronęMake sure that the handle and all associated hardware
is available at the site or order the mounting kit from
Hickory.
Make sure that the glass bar is in the open
position.
Closed Position
Open Position
Newer style units incorporate the spacer welded
on the glass bar..
Upper mounting hardware
Square silicon washer
Metal spacer
Glass
Column 1
Glass Replacement on the
5.5E & 10.10E Machines
Round silicone washer
Flat washer
1/4-20 x 1" special screw
4900 Westside Avenue, North Bergen, New Jersey 07047
Tel: [201] 223-0050 Fax: [201] 223-0950
Hickory Industries, Inc.
Make sure that the handle and all associated hardware
is available at the site or order the mounting hardware
from Hickory.
Glass handle, flat washer, lock washer, 10/32 screw
Glass
The glass mounts between the glass handle and the flat
washer.
Install the glass handle. Be sure to use Loc-Tite.
Glass
Frame
Glass
Handle
NOTE: THE 90 BEND ON THE GLASS
HANDLE IS LOWER THAN THE GLASS. DO
NOT MOUNT THE HANDLE WITH THE 90
DEGREE BEND UP.
USE HIGH TEMPERATURE LOC-TITE
on all screws for both the glass handle and the
upper mounting screws.
Otherwise the handle will come loose and chip
the glass or fall slightly and chip around the
mounting screw holes. This will lead to break-
age!
Column 2
N/5.5E Installation 8/5/97
Page 13 of 15