Hickory N/5.5 E Instrukcja instalacji - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Piekarnik konwekcyjny Hickory N/5.5 E. Hickory N/5.5 E 15 stron.

Replacing the front glass

Insert the screw on to the glass (use hi heat Loc-tite).

As a hint, start with the middle screw it will give you

some leverage with the glass.

Slowly turn the screw onto the glass bar - DO NOT

TIGHTEN. Make sure that you do not see any

threads or that the glass rests on the threads.

Make sure that when resting the glass on the

screws, it only rests on the un-threaded portion

of the screw (closest to the head of the screw).

Before moving glass make sure threads are inserted

onto metal spacer

Threads Exposed

Column 3

4900 Westside Avenue, North Bergen, New Jersey 07047

Tel: [201] 223-0050 Fax: [201] 223-0950

Hickory Industries, Inc.

DO NOT TIGHTEN. This will ensure that you have

enough play to move the glass around without

bumping the glass.

Proceed with the remaining screws (use hi heat Loc-

tite). Make sure that the glass is sandwiched be-

tween silicone washer and the silicone spacer.

Silicone

Washer

Silicone

Spacer

Slightly turn each screw until snug. It should be snug

but loose enough to move . Adjust the glass so that

the spacing is even around the sides and bottom of

the machine. You can now verify the glass spacing

with the side and the bottom of the machine.

Improperly Spaced

Note:

Uneven

Spacing

Properly Spaced

Note:

Even

Spacing

Column 4

N/5.5E Installation 8/5/97

Page 14 of 15