AirCycler SmartExhaust Podręcznik
Przeglądaj online lub pobierz pdf Podręcznik dla Kontroler AirCycler SmartExhaust. AirCycler SmartExhaust 2 stron. Bath fan/ light switch /delay timer/ventilation controller
Earn a lEED Point for Enhanced Exhaust Ventilation! *
Introducing the SmartExhaust
Bath fan/ light switch /DElaY tiMER/VEntilation con
Set the Ventilation & delay times from
0- 60 minutes.
smartExhast
tM
specs:
Light:
450 Watts @ 120 VAC
(blue wire)
Fan:
150 Watts @ 120 VAC
(red wire)
Operation:
120VAC +- 10%
50/60 hz
www.aircycler.com
AirCycler a Division of Lipdex Corporation
411 Plain Street, Marshfield, MA 02050
For more information call:
1-877-FAN-CONTROL
(1-877-326-2668)
www.aircycler.com
take control of the Bathroom fan:
fan Delay timer & Ventilation controller ...
u Make standard bath fans ashRaE 62.2 compliant*
u Microprocessor technology provides precise ventilation times.
u fan runs every hour for set ventilation, less any manual
and delay operation.
u Excess manual and/or delay operation is subtracted
from next hours ventilation time.
great for - Meeting ventilation codes, Reducing Mold,
u
Mildew & Pollutants, saving energy and you money!
u Enables use of energy efficient cfls in the bathroom.
The new SmartExhaust™, from the same people who
brought you the aircycler line of ventilation controllers,
introduces a simple, smart, flexible and economic solution for
exhaust ventilation requirements.
The SmartExhaust™ is designed as a replacement for the bathroom fan
and light switch. By using a microprocessor to monitor and control fan
operation, a precise amount of ventilation can be provided.
switch on: light & fan turn on... switch off: light turns off,
fan remains on for set delay time. off-on-off fan goes off.
There are only two settings on the SmartExhaust™ switch - Ventilation
and Delay. Ventilation is the minutes per hour that you want the fan
to operate. Delay is the number of minutes you want the fan to run
after the bathroom light has been turned off. The Delay time provides
additional run time of the fan to complete ventilating the bathroom
after use. The SmartExhaust™ is so smart, you can tell it you don't need
the fan to run when you leave the bathroom. When you turn off the
light, turn it back on then back off again within a few seconds it tells the
SmartExhaust™ you don't want the fan to continue running.
Since you are substituting an existing switch, or maybe even two, there
are no additional labor costs to the SmartExhaust™ installation. With
the light and fan being the same switch, the ventilation strategy can't
be defeated.
it's simple,
the Most Economical Ventilation solution!
Patent Pending. Cover plate not included. Use any standard switch plate.
light switch, Bath fan switch,
it's smart,
it's easy...
*When used with compliant fan and flow rates.
TM
tRollER
all in a single switch!