Hickory Industries Rotisseries N/1.9E Instrukcja instalacji i obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla grill Hickory Industries Rotisseries N/1.9E. Hickory Industries Rotisseries N/1.9E 14 stron.
Drukuj stronęLOADING AND UNLOADING:
With the chickens properly tied and spitted, slide each loaded spit onto a drive shaft. Repeat the process
for all the spits you intend to use. When you are finished loading, the unit is ready to cook. To remove the
cooked product, use a barbecue forked to loosen the chicken form the spit and just slide toward you. Repeat
the process for all the other spits and the unit is ready for the next batch.
CHECKING CHICKENS FOR DONENESS:
A 2
/
lb. chicken will take approximately 75 minutes to cook in a preheated oven when the thermostat
1
2
is set for 400°F. By using a stem type thermometer, the operator should determine the interior temperature
to test for doneness. Chicken is done at 185°F.
CLEANING:
The machine should be thoroughly cleaned after each day's use. Any commercial grade grill and oven
cleaner may be used. The operator should follow the cleaner manufacturer's instructions. Avoid steel wool
or abrasives. If carbon has built up, use a nylon "Scotch Brite" pad to repolish the surface. (Do not use
Scotch Brite on any control panel surface because lettering may be removed). For polishing the exterior
surface use a commercial grade stainless cleaner and polisher. For the glass panels, use a glass cleaner and
dilute it with up to 20% ammonia. The rear panel can be removed by loosing the thumb nuts and removing
the panel. Before doing so please power down the unit so that the heating element and fans cannot be turned
on. The panel can be soaked or placed in a dishwasher to eliminate most grime and carbonization. With
the rear panel out the fan blades are accessible for cleaning. The more dirt and grime on the fans the less
efficient they are.
WARNING: BE CAREFUL, GLASS MARRING, CHIPPING OR BREAKAGE
OCCURS PREDOMINANTLY WHEN GLASS IS REMOVED
FROM MACHINES. IF CHIPPING OCCURS, DO NOT PLACE IT
BACK IN THE MACHINE. ONCE GLASS IS CHIPPED OR
SCRATCHED, IT CAN AND WILL BREAK. REMEMBER, IF
YOU KEEP YOUR ROTISSERIE CLEAN YOUR CUSTOMERS
MAY NOT NOTICE, BUT THEY WILL NOTICE IF YOU KEEP IT
DIRTY!
4900 Westside Avenue, North Bergen, New Jersey 07047
Tel: [201] 223-0050 Fax: [201] 223-0950
Hickory Industries, Inc.
1.9 Manual 10/97
Page 9 of 14