Dynakit MArk IV Instrukcje dotyczące montażu - Strona 2
Przeglądaj online lub pobierz pdf Instrukcje dotyczące montażu dla Wzmacniacz Dynakit MArk IV. Dynakit MArk IV 16 stron.
Również dla Dynakit MArk IV: Instrukcje dotyczące montażu (12 strony)
Drukuj stronęSPECIFICATIONS
Power output: 40 watts continuous, 90 watts peak
1M distortion: less than 1% at 40 watts, less than
.05% at 1 watt
Frequency response: ± .5 db from 10 cps to 40 kc;
± .5 db from 20 cps
to 20 kc at 40 watts output
Power response: 20 cps
to
20 kc without exceeding
1 % distortion within 1 db of 40 watts
Sensitivity: 1.3 volts rms input for 40 watts output
Hum and Noise: Inaudible; 90 db below 40 watts
(choke filtering)
Damping Fador: 15
i
Output Impedances: 4, 8 and 16 ohms
Tubes: EL-34
(2),
7199, GZ-34, selenium rectifier
Finish: bright nickel chassis, vinyl coated charcoal
brown cover
Special Features: Matched tubes, Dyna Biaset for
non-cri tical adjustment, preamp power socket, fuse
post, on-off switch
Power Consumption: 115 watts
Size: 5" x 14" x 6%" high
Weight: 20 pounds