HID iCLASS R10 Instrukcja instalacji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Czytnik kart HID iCLASS R10. HID iCLASS R10 3 stron.
Również dla HID iCLASS R10: Instalacja (2 strony), Instalacja (2 strony)
Drukuj stronę
Installation Guide
iCLASS™ Reader Models R10, R30, R40, RW300, RW400
3- Preparing/Mounting
Install Mounting Plate to wall surface or back box, then reassemble reader (reverse Step 1 procedure).
Dimensions are in inches (centimeters).
R10 Mounting Plate
4- Connecting
Yellow
*Speaker
Blue
*Hold
Violet
***Open Collector
White
Data 1
Green
Data 0
Orange
*Green LED
Brown
*Red LED
Red
+DC (10-16 VDC)
Black
Ground
Gray
***RX (Serial Receive)
Red/Green
***DSR (Not Used)
Pink
***TX (Serial Transmit)
An ASSA ABLOY Group company
_____________________________________________________________________________________________________
HID Corporation 9292 Jeronimo Road Irvine, CA 92618-1905 USA TEL (949) 598-1600 (800) 237-7769 FAX (949) 598-1690
Web page - www.hidcorp.com e-mail – [email protected] iClass ™ Reader Installation Manual 6090-900 Rev 8
R30/RW300 Mounting Plate
5- Testing
•
Turn Power On - watch the sign-on LED and hear the
speaker tones sequence.
•
Use a Test Card - watch for the LED flash and hear the
Speaker tone for each card read.
6- Optional Features
•
RS232 interface/Host Mode - for applications requiring a
serial link. See Protocol Document 6090-902 for information
•
Open Collector Output – controls an external device
(13.8VDC Max) operating in Host Mode only. See iCLASS
Application Note for details
•
Configuration Options - Configure LED, Speaker, and other
features. See How To Order Guide or iCLASS Application
Note for details
R40/RW400 Mounting Plate
ASSA ABLOY
Page 2 of
3