GReddy TYPE-RS BRS-610 GDB Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria samochodowe GReddy TYPE-RS BRS-610 GDB. GReddy TYPE-RS BRS-610 GDB 8 stron. Rs-type adapter kit
Drukuj stronę
Installation
Installation
Installation
Installation
Disconnect the blow by hose and remove
(1)
the blow by tube off from the intercooler.
Disconnect the Air Bypass Valve hose and
(2)
remove the valve.
Disconnect the turbo outlet hose and
(3)
throttle hose and remove the intercooler.
Remove the left blow by hose. Cut the
(4)
provided 12φ rubber hose to 650mm and
install it using the provided three way
fitting to the right blow by hose as shown.
To prevent the hose from interfering with
※
the throttle, route the hose over the
throttle body and secure the hose to the
intake manifold with the provided zip ties.
※ Secure the hose ends with the provided zip ties.
Blow by Tube
Return hose
Turbo outlet
‹№9›
Check clearance
at throttle
Secure at zip tie
5－
－
Vacuum hose
Mounting bolt
Throttle
‹№7›