Gaia Baby Serena Junior Bed Extension Instrukcja montażu - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Meble dla niemowląt i małych dzieci Gaia Baby Serena Junior Bed Extension. Gaia Baby Serena Junior Bed Extension 8 stron.
Drukuj stronęJunior bed extensions safety information
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY
AND RETAIN FOR FUTURE REFERENCE
INSTRUCTIONS FOR SAFE USE
• Recommend mattresses sizes:
Junior bed extensions: 250mm long x 650mm wide x 100mm depth.
• Children are likely to play, bounce, jump and climb on beds, therefore
the child's bed should not be placed too close to other furniture or
windows, and should be placed either tight to any wall or have a gap of
300mm between the wall and the side of the bed.
• The mattress should be no more than 30mm shorter or narrower than
the internal length or width of the cot.
• Please ensure that all fittings are tightened properly before use.
Fittings should be checked and tightened regularly every 2 to 3 weeks.
• Your junior bed may be cleaned with a damp cloth. Never use bleach or
abrasives cleaning agents as this will damaged the surface.
• This cot bed is intended for children aged from 4 to 5 years of age
approximately.
• This cot bed conforms to BS 8509:2008 + A1 2011.
Manufacturer Warranty
All Gaia Baby furniture carries a full 2 year manufacturer's warranty.
The warranty does not cover wear & tear or damage caused by the
product not being used in accordance with correct care instructions.
The warranty period is effective from date of purchase. The warranty
applies to product presented with an original receipt or proof of
purchase. The warranty applies to the territory in which the product was
purchased.
During the warranty period, Gaia Baby will repair or replace any
defective part.
In the event of a product being replaced in entirety, the guarantee on the
replacement will expire two years from the original purchase date.
This is a natural wood product. Some variation in surface finish and
colour may occur. While every attempt is made to colour match
replacement parts, colour matching cannot be guaranteed.
This guarantee excludes accidental damage, misuse and or damage
caused by improper transport or handling.
This warranty is void if the original product has been altered in design
or colour in anyway and/ or if not presented with an original receipt as
proof of purchase.
7