HID OMNIKEY 2061 Podręcznik użytkownika - Strona 16

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Czytnik kart HID OMNIKEY 2061. HID OMNIKEY 2061 17 stron. Bluetooth reader

2061-905_A.1

Reader Installation). Manual installation is recommended only for experienced users with

administrative privileges. Ensure that your Bluetooth radio is connected and operable.

Define a common name for the device before installation. See details in section 4.2.3 Installation

Properties.

The default device PIN is 0000. For security reasons it is recommended to set a more secure PIN

as described in section 4.2.6 Set Reader PIN.

6 .1

M icr osoft Blu e t oot h St a ck

1. Power on the OMNIKEY 2061 Bluetooth reader. The green LED is illuminated. If not,

verify the batteries are charged.

2. Pair the reader with the host:

a. Open the Bluetooth dialog by clicking Start > Control Panel > Bluetooth

Devices.

b. Search the OMNIKEY 2061 Bluetooth reader, click Add....

c. Check My device is set up...

d. Select your OMNIKEY 2061 Bluetooth reader from the list of found Bluetooth

devices, click Next.

e. Check Use the passkey... and enter the device PIN.

If successful, the Outgoing COM port is displayed in the dialog. This port number is

needed for driver configuration.

3. Open a command shell and go to the installation directory of the configuration software.

The default path is C:\Program Files\HID Global\OMNIKEY 2061 Bluetooth.

4. Install a driver instance by calling OK2061_install.bat. For this step required are

administrative privileges.

5. Configure the driver:

a. Open the registry editor.

b. Change to

HKLM\System\CurrentControlSet\Enum\Root\SMARTCARDREADER

c. Select the corresponding driver instance key, for example 0000. Select the Device

Parameters key of the corresponding driver instance key.

d. Add a new DWORD Value Port and set the assigned Outgoing COM port for this

value.

Page 16 of 17

OMNIKEY 2061 Bluetooth Reader

User Manual, Firmware V1.27

March 24, 2010