HID pivCLASS R40-H Instrukcja instalacji - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Czytnik kart HID pivCLASS R40-H. HID pivCLASS R40-H 8 stron.
Drukuj stronę
I N STALLATI ON GUI DE
B
Reconfigure Reader Assembly
The following steps reconfigure the reader assembly to position
the Contact reader component on the left side of the assembly.
1. Disassemble the reader.
• Remove the Keypad reader from the backplate
• Carefully unplug the ribbon cable from the module in the
back of the Keypad reader. Caution: Do not pull on the ribbon
cable as this may damage the connection to the connector.
• Remove the Contact reader from the backplate
• Gently pull the ribbon cable through the backplate
Contact reader
2. Reassemble with the Contact reader on the left side of the assembly.
• Rotate the backplate so that the large cutout for the power cable is on the left
• Gently route the ribbon cable back through the backplate slots, as shown below
• Plug the ribbon cable back into the module (back of Keypad reader) and ensure module is fully
seated into the reader
• Attach the Contact reader to the backplate (this must be installed first, as the Keypad Reader will fit
slightly over the Contact reader)
• Attach the Keypad reader to the backplate (power cable must be threaded through the large
square cutout on the backplate)
• Return to Section 2
Keypad reader
This Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output
are fictitious. Specifications are subject to change without notice.
© 2012 - 2018 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID GLOBAL, HID, the HID Brick logo, the Chain Design, and PIVCLASS are trademarks or registered
trademarks of HID Global, ASSA ABLOY AB, or its affiliate(s) in the U.S. and other countries and may not be used without permission. All other trademarks, service marks, and
product or service names are trademarks or registered trademarks of their respective owners.
h id g l o b a l.co m
pivCLASS
Ribbon cable
Backplate
An ASSA ABLOY Group brand
R10-H, RP10-H, R40-H, RP40-H, RK40-H, RPK40-H, RKCL40-P,
Contact reader
Ribbon cable
Backplate
RPKCL40-P, RKCLB40-P
Keypad reader
Keypad reader
Contact reader