Dynalink RTA020 Podręcznik szybkiej konfiguracji - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Router sieciowy Dynalink RTA020. Dynalink RTA020 6 stron.
Drukuj stronę
Step 5. Save configuration
Go to Tool > Save Configuration. Click on Save. Next go to Tool > Reset
Router. Make sure the "Reset to factory default settings" box is NOT ticked.
Click Restart. Note- if you reset to factory default the configuration will be lost!
When router restarts the DSL light on the front panel turns solid normally within
one minute. This means router has already established link to the telephone
exchange and will attempt to log in using you Internet account information.
Subject to successful authentication you can start browsing. Observe that the
DATA light flashes as data get through.
If nothing happens return to Step 4. Scroll down to the bottom of page and click
Connect. Soon after that you should be able to observe data getting through.
Any time if you want to check the connection status, go to Status >
Connection > PPP. The picture here shows router logged in.
III. Experienced users
Refer to these sections of User Manual if you want to.....
Configure PC to get IP from DHCP
Use the Web Configuration Manager
Change the private IP address of the router
Enable DHCP
Page 34 Section 4.2
Page 41 Chapter 5
Page 46 Section 6.2.1
Page 47 Section 6.2.2
Enable routing RIP v1/v2
Modify ISP login name or password
Change from Dynamic to Static WAN IP
Modify user name or password
for router management
Set static routing table
Set IP packet filtering (NAT)
Set virtual server (NAPT);
Run applications such as Netmeeting, IRC,
Quake, FTP/Mail/Web server
Get connection status
Get connection statistics
Show routing table
Show DHCP table
IV. Indicator lights
There are five indicator lights on the front panel of the router:
Indicator Function
PWR
Power
Page 49 Section 6.2.3
Page 51 Section 6.3.2
Page 51 Section 6.3.2
Page 57 Section 6.4.1
Page 58 Section 6.4.2
Page 61 Section 6.4.3
Page 64 Section 6.4.4
Page 66 Section 6.5
Page 71 Section 6.5.4
Page 73 Section 6.5.5
Page 74 Section 6.5.6
Description
Off - No power.