Dynalink RTA1030W Arkusz specyfikacji - Strona 3

Przeglądaj online lub pobierz pdf Arkusz specyfikacji dla Router sieciowy Dynalink RTA1030W. Dynalink RTA1030W 3 stron. Adsl+ wireless modem router

Drukuj stronę

Technical Specifications

Hardware Interface

• One RJ-11 port for ADSL connection

• IEEE 802.11g and 802.11b Wireless LAN interface

• Single Ethernet port for IEEE 802.3/802.3u 10/100

Base-T auto-sensing, auto cross-over

• One USB port compliant to USB v1.1

• One hidden reset button for restoring factory

default settings

Chipset

• Broadcom BCM6348 single-chip ADSL2+ with

integrated MIPS32 CPU, transceiver & Analog

Front End

• Broadcom BCM4318 single-chip 802.11g wireless

LAN solution

Wireless LAN

• Supports IEEE 802.11g and 802.11b

• Data Rates: 54, 48, 36, 24, 18, 12, 9, 6 Mbps for

802.11g and 11, 5.5, 2, 1 Mbps for 802.11b

• Diversity antenna system: one external antenna

and one internal antenna

• Maximum RF output power: 18dBm for 802.11g

• Coverage Area:

802.11g: LOS (Outdoors): Max. 50 meters;

Indoors: Max. 20 meters

802.11b: LOS (Outdoors): Max. 180 meters;

Indoors: Max. 60 meters

• Support WEP (Wired Equivalent Privacy) RC4 with

64-bit or 128-bit key length

• Support Access Control List, only registered WLAN

clients are allowed

• Support 802.1x, WPA-PSK, WPA, WPA2 & Mixed

WAP/WPA2.

www.dynalink.co.nz

Single Ethernet Port with 11g Wireless and Firewall

www.dynalink.com.au

(RTA1030W)

Regulatory Approval and Compliance

• ACA

• Telecom New Zealand PTC270

Power Requirement and Operation

Environment Requirement

• Power Adaptor: Output 12 VAC, 1A

• Power Consumption: less than 10 W

• Ambient Temperature: 0 to 40°C

• Relative Humidity: 20% to 90% (non-condensing)

Physical

• Front Panel: 6 LED Indicators

• Back Panel