Dynalink WLG25PCI Podręcznik szybkiej konfiguracji - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Adapter Dynalink WLG25PCI. Dynalink WLG25PCI 10 stron. Wlan pci adaptor
Również dla Dynalink WLG25PCI: Podręcznik użytkownika (16 strony)

Drukuj stronę
WLAN PCI Adaptor Quick Set-up Guide
Two encryption systems are available with WPA-PSK. The TKIP (Temporal Key
Integrity Protocol) is an enhanced version of WEP. The encryption key is changed
for every packet. Compared with WEP, TKIP makes it very difficult for hackers to
decrypt messages. Another system, AES (Advanced Encryption Standard) was
developed for the US Government. AES is seen by many as the best compromise
among requirements for security, performance and flexibility.
2
Installing the Wireless Adaptor
Before You Start:
If you have installed the Wireless Adaptor driver & utility before, please uninstall
this before reinstalling. Refer to Section 6.1 of this Guide.
INSTALL PROCEDURE FOR HARDWARE
Switch off the computer. Open the computer chassis to locate an empty PCI slot.
Touch the exposed metal chassis of the computer to discharge any electrostatics.
Firmly insert the card into the PCI slot. Secure the card to the chassis using a
screw. Replace the cover. Connect the supplied antenna to the card.
INSTALL PROCEDURE FOR DRIVER AND WIRELESS CONFIGURATION UTILITY
1.
Power on the computer.
2.
Windows would pop up a "Found New Hardware" message box, requesting
search for a driver. Click Cancel to proceed.
3.
Exit from all programs that may be running in the background.
4.
If you are reading this Quick Set-Up Guide from the supplied CD, return to the
previous menu and click the Driver & Utility button. Otherwise, load the supplied
CD and go the WLG25PCI product page and click the Driver & Utility button.
5.
Double click on RaLink2_RT2500.exe to run the install wizard.
6.
Click Easy Install to begin
installing driver and utility.
7.
When Setup has finished
installing, click Finish
to complete.
8.
Windows will detect new
hardware and start to install
the driver. Windows XP users
– if installation pauses, click
the Continue Anyway button
to resume driver installation.