Dynalite Baja Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Lampa błyskowa aparatu Dynalite Baja. Dynalite Baja 16 stron. Portable electronic flash
Również dla Dynalite Baja: Podręcznik użytkownika (12 strony)

Drukuj stronę

1. Getting Started

The Dynalite Baja Portable Electronic Flash

The Dynalite Baja B-4 is a self contained

400 watt / second portable monolight

flash. Powered by an internal Lithium

Ion rechargeable battery and controlled

with the optional BRT616 or BRT616c

radio transmitters, there are no cords

or cables to clutter a set in the studio or

at a location.

The Baja B-4 is light in weight while

remaining strong in features including

adjustments in one tenth of a stop

increments over a six f/stop range, high

speed sync, short duration flash and

stroboscopic flash modes.

1. Flash Power Control Dial — Turn it clockwise to increase the power output. Moving the dial

counter clockwise lowers the power.

2. Modeling Light Power Control Dial

3. RPT Button engages C or HSS modes. Press and release for C mode. It also cycles the C

mode for five, ten or fifteen stroboscopic flashes. Press and Hold for HSS (High Speed Sync.)

4. Mode controls the flash duration. This button switches between Normal mode and T mode--

short duration flashes

5. Cell Button switches the flash tripping sensor on or off.

6. Sound Button toggles an audible tone when the Dynalite Baja B-4 is fully charged.

7. Test Button fires the flash without having to take photograph with the camera.

8. Power Switch turns the Baja unit on or off.

9. 1/4 inch sync cord socket for wired or Pocket Wizard sync with a camera.

10. Charging Socket

11. Battery Power Level Indicator

12. Battery Status — Bottom Amber = Charging, Middle Amber = Empty, Top Amber = Battery

Fully Charged

13. Main Display shows Power Output Setting, Short Duration Setting, Stroboscopic Mode

selected. Red LED lights show (top to bottom) RPT, Mode, Cell, Sound and Test

14. BRR616 — 6 group 16 channel receiver included with the Dynalite Baja B-4

15. Remote Trigger Sensor detects the flash from another Dynalite Baja, head or speedlite to

fire the unit's flash.

16. Easy Carry Handle

17. Battery Cover Release

18. Accessory Release

19. Umbrella Socket — Push the umbrella's shaft into the socket. No tightening knob needed.

20. L.E.D Modeling Light — Note that the light is always on when Baja is powered up.