Gree 13-04582 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Klimatyzator Gree 13-04582. Gree 13-04582 18 stron. 3-in-1 mobile air conditioner

Gree 13-04582 Instrukcja obsługi
You can control your air conditioner from a distance with the remote control provided with
your unit. The remote can control the same functions than those operated directly from the unit
on the control panel. Before using the remote, do not forget to insert 2 AAA 1.5V batteries
(included).
How to insert the batteries
• Following the arrows shown in the figure, remove the
battery cover.
• Insert the 2 batteries, making sure that the terminals
(+ /-) are correctly fitted.
• Put the cover back into position.
Note :
Always use 2 AAA 1.5V battaries. Replace batteries
with new ones when the LCD display of your remote is
fading out.
U
:
SING THE REMOTE
• Always line up the remote signal transmitter with the unit signal receiver on the front panel.
• The LCD display of the remote will show all the messages and icons you may need to control your air
conditioner from a distance.
• All operational functions of your remote, as well as message and icon identification are described in
the next 2 pages.
• After entering a mode or function on your remote, always press on SEND to initiate the command on the
unit. You will hear a "beep" from the unit, meaning that the function has been received and initiated.
• When keying a function or mode on the remote, the identification icon or message flashes on the remote
LCD display and stops flashing when the SEND button is pressed.
POWER FAILURE
• In case of a power failure during operation, all settings programmed directly from the unit will
be cancelled.
• However, the remote control will keep in memory the last settings programmed on the remote
control. To resume operations, simply press on SEND.
• If the air conditioner does not work properly, unplug the unit and plug it back.
• Wait 3 minutes and then turn the unit on.
• Press SEND on the remote control to resume last operations set from the remote.
REMOTE CONTROL
11