Gainsborough Solar Lying Angel Instrukcje montażu/instrukcje użytkowania

Przeglądaj online lub pobierz pdf Instrukcje montażu/instrukcje użytkowania dla Oświetlenie zewnętrzne Gainsborough Solar Lying Angel. Gainsborough Solar Lying Angel 3 stron.

Drukuj stronę

Solar Lying Angel

K224

v001: 08/12/21

Please read and retain these instructions for future reference

ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:

Unpack the components carefully. Please check all parts have been removed from the packaging.

OPERATION

FOR FIRST TIME USE:

Step 1:

Fully charge the battery before first use. Charge under direct sunlight in the <ON> position for 2 days.

Step 2:

Once the batteries are fully charged, set the ON/OFF switch to ON. If the lamp does not turn on after dark

refer to Maintenance section.

Your solar light will automatically turn on once it gets dark.

Find an ideal Place for the Solar Light.

Place the solar light in an area where it will receive direct sunlight for at least 8

hours per day. The solar panel is located on the back side of the angle. The

number of hours the light will illuminate is directly proportional to the hours of

sunlight it receives. If the light is placed in a shaded area, it will not be able to fully

charge and its illumination time will be limited. Do not place the light near other

outdoor lighting like porch or streetlights. These may fool the sensor and keep the

light from coming on, or cause it to turn off automatically.

Dimensions

(H) 14 x (W) 26 x (D) 11cm

Material: 90% Polyresin, 10% Plastic

•

PEACEFUL SLEEPING ANGEL WITH 3 WARM WHITE LED'S

AROUND HER HEADBAND THAT AUTOMATICALLY

ILLUMINATE AT DUSK (LEDs not replaceable)

•

MADE TO LOOK LIKE STONE BUT MADE OUT OF

WEATHERPROOF POLYRESIN

•

BUILT IN DISCREET SOLAR PANEL

ALWAYS POSITION IN DIRECT SUNLIGHT