Hiddenbed Double Decker Instrukcja montażu - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz Hiddenbed Double Decker. Hiddenbed Double Decker 16 stron.
Również dla Hiddenbed Double Decker: Instrukcja montażu (18 strony)
Drukuj stronęTO OBTAIN A SAFE A RELIABLE PERFORMANCE
Make sure that:
Side panels bears on the floor at the same level. A carpet can be placed
beneath both said adjacent bearing sides, but not place carpet or any
shim beneath on side desk or body side alone.
Stand at the middle of the furniture to make the transformation.
Use a mattress of ............. of a maximum height of 10 inches.
Total weight added on the moving parts, best around 40 lb.
Avoid excessive or too asymmetric loads on desk.
While lowering, please verify that bed bottom does not touch things left
on the desk. Things left on the desk cannot exceed 18 inches height. Next
to the rear of the desk there is less height available.
As with a door or a rocking chair, take good care not to trap fingers
between closing parts.
If power or signal cables are to be installed, consult a qualified person.
If the bed does not stay down by it, add more weight on the desk.
if the situation continues have the position point of action changed to a
lower strength position.
Remember a force equivalent to lift a CRT monitor is needed to transform
the bed into desk.
Ask your retailer for more details.
WARNINGS
(!)Like a sliding door or a car door or a bike, you have to
do certain things to enjoy Hiddenbed Safely and
reliably. Pay attention to theses recommendations!