Hiddn KryptoDisk 2 Instrukcja szybkiej instalacji

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Przechowywanie Hiddn KryptoDisk 2. Hiddn KryptoDisk 2 2 stron. Selfkey model
Również dla Hiddn KryptoDisk 2: Podręcznik użytkownika (17 strony), Podręcznik użytkownika (16 strony)

Drukuj stronę
KRYPTODISK 2
USER PRIMARY AND USER DATA RESTORE
QUICK

INSTALLATION GUIDE

SECURITY FIRST
As any type of storage device may
unexpectedly fail we strongly
recommend that you store and backup
any valuable or critical data. Consult
your IT-department for guidelines or
consider using at least two independent
storage devices for critical data
General information
Introduction
Please read through this guide
thoroughly before powering up your
KryptoDisk.
IMPORTANT:
Incorrect use may lead to loss of
data. Read the security information
section before first time use.
Remove the protection shield
from the display before use.
If the KryptoDisk is new and
uninitialised or has been zeroized,
you will need to prepare it for first
time use, see section "First time
use".
Full user guide available at
hiddn.no/support
First time use
Step 1. Initialise
Plug the KryptoDisk into a USB port
and follow instructions on the display.
You will be asked to restart your
KryptoDisk. Restart the KryptoDisk by
unplugging it from the USB port and
then plugging it back.

Security information

Procedure for lost user primary card
1.
Zeroize your device to invalidate your
primary card.
2.
Insert user data restore card. Enter
PIN from the PIN/PUK card.
3.
Follow instructions in the display
4.
When device is initialised and restore
data card activated you will have
access to your data again.
5.
Make a back-up of your data and
order a new set of cards.
6.
Follow procedure for new set of
cards.
Admin menu
Admin menu
To enter the Admin menu, press and
hold the '0' key while powering on the
device.
Use the '0' key to navigate in the
Admin menu.
Disclaimer
Hiddn accepts no liability for any consequential, incidental, direct or indirect damage (including but not limited to loss of productivity, loss of business profits, business
interruption, loss of business information and similar events causing losses to business or other consequential economic loss) arising from any action and/or inaction based on
information contained in this document. Hiddn accepts no liability for any loss of data and/or company and/or personal information that may result from any action and/or inaction
based on information contained in this document. Users are instructed to have backups of all data prior to installation of any device or products described herein. Users are
recommended to have separate backup of all data. All Hiddn KryptoDisk parts are Hiddn parts, and Hiddn does not accept any liability for any direct or indirect loss related to the
handling and/or mishandling of any of the parts and/or combination of the parts provided in this package. Hiddn reserve the rights to at any time and without notification change
its offer and/or price and/or availability of parts.
Rev. no 1.03.KD-SHE-15.02.18.
Hiddn's advantage
Designed, produced and assembled in Norway
All trademarks and brand names are the property of their respective owners
PACKAGE INCLUDES
KyptoDisk 2 and case
USB Cable
User primary and user data restore card
PIN/PUK card
Use of primary and restore card
PLEASE REMEMBER TO KEEP THE USER DATA RESTORE
CARD AND THE CARD WITH PIN AND PUK INFORMATION IN
A SECURE PLACE.
IF YOU USE YOUR USER DATA RESTORE CARD WE
STRONGLY RECOMMEND A BACK-UP OF ALL DATA
STORED ON YOUR DEVICE.
Step 2. PIN code
Insert the primary user card and enter
the PIN printed on the PIN/PUK card.
The PIN can be changed later from
the admin menu.
New set of cards
If you activate the user data restore
card, please order new set of cards
as soon as possible from your
reseller, distributor or
Procedure with new set of cards
1.
Zeroize unit from the Admin
menu.
2.
Follow procedure for "First time
use".
3.
Restore data from your back-
up.
Other admin features
The admin menu provides detailed
system information, enables you to
change PIN and set the device name.
Please note that PIN, PUK and
other security parameters are not
stored by Hiddn and cannot be
recovered if lost.
ALPHANUMERIC
KEYBOARD
* ON/OFF
* BACK
* BACKSPACE
0: OPENS ADMIN MODE
USE '0' KEY TO NAVIGATE IN THE
ADMIN MENU
Step 3. Formatting the disk
Please use Disk Management
(Windows) or Disk Utility (macOS) to
initialise and format your KryptoDisk.
You will find a guide on the next page.
After formatting the disk drive your
KryptoDisk is ready for use.
PIN Recovery
The PUK code can be used to restore
access to a device that has been
locked due to too many incorrect PIN
attempts.
A PUK can reopen the smart card
and set a new PIN.
The PUK cannot be changed.
Important security functions from the admin menu
Zeroize
Zeroize wipes all settings and
invalidates the smart card in addition
to restoring the device back to factory
default settings.
The user data restore card will
recover data from an invalidated
primary user card and zeroized
device. If you invalidate the data
restore card, your data is lost.
OLED
DISPLAY
# ENTER
User primary card
This is your primary keycard with a pre-
set PIN found on your PIN/PUK card.
PIN can later be changed from the
Admin menu.
User data restore card
The user data restore card is your back
up if you have lost or invalidated your
primary user card.
Use of data restore card will require
that you have the original PIN from the
PIN/PUK card available.
New set of user cards
If you use the user data restore card,
please order new set of user cards as
soon as possible from your reseller,
distributor or [email protected].
Security recommendation
To ensure the best security for your
device and protection of your data we
recommend that you keep the key
card and KryptoDisk separated when
not in use.
If your primary card is lost, stolen or
broken please invalidate the primary
card as soon as possible. See section
"procedure for lost user primary card".
The Zeroize function is used for
invalidating user primary card and
resetting the device to factory settings.
Please note that invalidating of both user
primary and user data restore card will
require new set of cards. A new set of
cards will not restore data.
Support
www.hiddn.no/support
www.hiddn.no